Marshall Profiling's cutting service is utilised by businesses throughout the Waikato and beyond. The company operates two Multi-Process Plate Profilers, cutting a wide range of metal plate including, stainless, mild, high tensile and wear resistant steels as well as aluminium. We can supply the plate or you can provide your own.
We also offer a pressing service providing you with a “one-stop shop for all your profiling and pressing requirements.
The Multi-Process Plate Profilers are CNC controlled, providing repeatable accuracy.
The cutting beds are 3,600mm wide and 13,000mm long and 3,000mm wide and 12,000mm long. Parts can be etch marked and cut with just one plate set up. Square to round transitions can be quickly and easily drawn, etched for press lines and cut with the aid of specially designed software. Plate drawings can be produced or altered on site.
| Kinetic K2000 |
Cutting area: |
3600mm wide by 13000mm long |
| |
Plasma etching:
|
Press lines
Part numbers
Hole centres
Weld positions
|
| |
Plasma cutting
|
2mm up to 20mm
Aluminium
Stainless steels
Medium Strength steels
Mild steel
High Tensile steels
Wear resistant steels
|
| |
Oxy Fuel cutting
|
3mm up to 130mm
Mild steel
High tensile steels
Wear resistant steels
|
|
Kinetic K3000
|
Cutting area
Oxy Fuel cutting
Etching tool
|
3,000mm wide and 12,000mm long
3mm up to 200mm
|
| |
Centre Drill
|
Provides accurate centre drilling of bolt holes, tapped holes or slots
|
| |
Optical Tracer
|
Allows the use of hand drawn objects to be cut and/or converted to a computer drawing
|
To discuss your cutting and pressing requirements, email us at profiling@marshallprofiling.co.nz or for more contact details see above.
